Banner DXMR90-X1 Series, Instruction Manual

Page: 29 / 55

May 09, 2023
DXMR90-X1 Series Controller Instruction Manual
29
The webserver and mail server authentication depends upon the service provider.
Set the Controller to use Authentication
The DXMR90-X1 can be configured to send login and password credentials for every HTTP packet sent to the webserver.
This provides another layer of security for the webserver data.
Configuration requires both the webserver and the DXMR90-X1 to be given the same credentials for the login and password.
The webserver authentication username and password are not stored in the XML configuration file and must be stored in
the DXMR90-X1 .
Set the Web Services to Use Authentication
From within the DXM Configuration Software , go to the Settings › Cloud Services screen. 1.
In the upper right, select Show advanced settings .
2.
Define the username and password in the Web Server Authentication section of the screen.
Web Server Authentication screen
The first time you select Require Authentication, a pop-up box appears with additional instructions. Since the data is
not stored in the XML configuration file, it is hidden from view of the DXM Configuration Software .
3.
Click on Send Authentication .
The controller must be connected to the PC for this operation to succeed.
The data transmits directly to the
DXMR90-X1's non-volatile memory. If successful, a pop-up window appears, asking
to reboot the device.
4.
Select Yes to reboot the device.
5.
At the Banner Cloud Data Services website, go to Settings › Sites .
1.
To edit the site settings, click Edit on the line of the site name.
Settings > Sites screen of the Banner CDS website
2.
© Banner Engineering Corp.