Banner DXMR90-X1 Series, Instruction Manual

Page: 30 / 55

May 09, 2023
DXMR90-X1 Series Controller Instruction Manual
30
•
•
•
Controller Configuration Authentication
The DXMR90-X1 can be programmed to allow changes to the configuration files only with proper authentication by setting up
a password on the Settings › Administration screen in the DXM Configuration Software .
With the DXMR90-X1 connected to the PC, click Get Device Status . The DXMR90-X1 status displays next to the button.
Settings > Administration screen
Use the DXM Configuration Software to:
Set the Admin Password
Change the Admin Password
Remove the Admin Password
To change or remove an admin password, the current password must be supplied. The DXMR90-X1 must be connected to
the PC to change the administration password.
Register Flow and Configuration
The DXMR90-X1 register data flow goes through the Local Registers, which are data storage elements that reside within the
processor. Using the configuration software, the controller can be programmed to move register data from the Local Register
pool to remote devices or the I/O base.
Register flow
Processor
Ethernet
I/O Base
Remote Devices
Basic Approach to Configuration
When programming an application in the DXMR90-X1, first plan the overall data structure of the Local Registers. The Local
Registers are the main storage elements in the DXMR90-X1 . Everything goes into or out of the Local Registers.
At the bottom of the pop-up window is a checkbox to enable authentication/validation.
Enter the same username and password as used in the DXM Configuration Software. The username and password
do not need to be a defined user within the Banner Cloud Data Services website.
3.
In the DXM Configuration Software , name the Local Registers to provide the beginning structure of the application.
1.
© Banner Engineering Corp.