Banner DXMR90-X1 Series, Instruction Manual

Page: 43 / 55

May 09, 2023
DXMR90-X1 Series Controller Instruction Manual
43
By default, each DXM shipped from the factory is assigned the IP address 192.168.0.1.
Immediately after the PROFINET protocol is enabled, the DXM has an IP address of 0.0.0.0. We recommend using the TIA
Portal to give the DXM an IP address so that the address is saved in the unit. When the PLC powers up, this IP address is
accessible. The PLC can change the IP address if it is configured to do so.
If the PLC assigns the DXM IP address (for example, using the Set IP address in the project option in Siemens TIA Portal),
the DXM receives the specified address, but only after the program has been loaded into the PLC and is running. If the DXM
is restarted after it was discovered and configured by the PLC, the DXM retains the IP address that was assigned to it using
the LCD or software until after the PLC discovers the DXM and assigns it the specified address again. However, if this ad-
dress is different than what is specified in the PLC, the DXM reverts to the address specified in the PLC after the PLC be-
comes active again.
These configuration options conform to the PROFINET standard.
Online & diagnostics menu and screen
The Online & diagnostics windows displays.
Select Assign IP address under Functions . 13.
Click Accessible devices .
The Select device window searches the network for available devices.
14.
Determine the device to be adjusted via the MAC address and select it. 15.
Click Apply .
The IP address for the device is updated.
16.
Click Assign IP address to complete the step.
This step is completed for every device.
17.
© Banner Engineering Corp.