Sustituya el DVD
Manejo de la unidad del DVD, 997 & 996
El kit ESD (descarga electrostática) debe utilizarse para manejar las unidades de DVD.
Los cables W77 y W76, conectados al mecanismo 996 del DVD, son sensibles a las
descargas electrostáticas que pueden dañar la unidad de DVD.
Sustituya el chasis principal del DVD (módulo 997)
Desmonte la tapa posterior.
Desmonte la tapa posterior superior.
Desconecte todos los cables conectados al módulo 997. Ver figura
23.
Preste especial atención a W76 (72P505) & W77 (72P504) debido a su sensibilidad
a la descarga electrostática.
- 72P504, 72P505 & 72P508, al módulo 996.
- 72P500, a la PCB74.
- 72P507, a la PCB32.
- 72P501 & 72P503, a la PCB14.
- 72P502, a la PCB2.
Desmonte el chasis principal del DVD.
- Extraiga los 4 tornillos. Ver figura
30.
- Coloque el chasis principal del DVD en la alfombrilla de protección antiestática.
Monte el nuevo chasis principal del DVD.
- Apriete los 3 tornillos.
- Conecte los cables al chasis principal del DVD.
Si W76 & W77 no están conectados correctamente, el chasis principal y el mecanismo
del DVD pueden dañarse.
Los cables están conectados al chasis principal del DVD. Ver figura
23.
- 72P504, W77 se monta con espuma a un lado
- 72P505
- 72P508
Instale la tapa posterior.
Desmontaje, Español 6.33
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK