Codice PIN disattivato dall’utente prima dell’intervento di assistenza
Se il codice PIN viene disattivato prima dell’intervento di assistenza, è necessario
che i moduli vengano registrati sul prodotto nelle seguenti situazioni:
- il prodotto è stato collegato alla rete di alimentazione per oltre 12 ore, incluso il
tempo di standby
- il codice PIN viene attivato o disattivato.
La registrazione dei moduli sul prodotto può essere modificata solo da Bang & Olufsen.
Attivazione del codice PIN
Selezionare il menu TV SETUP.
Premere due volte il pulsante
l
, quindi premere
STOP
per richiamare il menu
PINCODE SETUP.
Immettere il codice PIN a 4 cifre. Immetterlo nuovamente per confermarlo, quindi
premere
GO
.
Per modificare o eliminare il codice PIN, immettere il codice PIN corretto, quindi
premere
GO
.
A questo punto è possibile modificare o eliminare il codice PIN.
Immissione del Codice PIN
Se il codice PIN viene attivato e il televisore rimane scollegato dalla rete di alimentazione
per più di 15-30 minuti, all’accensione viene visualizzato il menu PINCODE.
Immettere il codice PIN per riavviare il televisore.
Codice PIN dimenticato
Se non si ricorda il codice PIN, l’unico modo per sbloccare di nuovo il televisore è
immettere il codice Master a 5 cifre.
Il codice Master può essere richiesto attraverso la rete di rivenditori autorizzati
oppure per mezzo dell’apposita formula. Se nessuna di queste opzioni è disponibile,
rivolgersi a Bang & Olufsen.
Se il televisore richiede il codice PIN, premere e tenere premuto il pulsante
l
per
richiamare il menu MASTERCODE.
Immettere il codice Master, quindi premere
GO
. Questa operazione consente di
disattivare il codice PIN e riattivare il televisore.
Televisore bloccato dal sistema con codice PIN
Il televisore viene bloccato dal sistema con codice PIN se:
- Il codice PIN viene attivato e il televisore rimane scollegato dalla rete di alimentazione
per più di 15-30 minuti.
Per sbloccare il televisore, immettere il codice PIN.
Il contatore del codice PIN è impostato per consentire 5 tentativi da eseguire
nell’arco di 3 ore.
Se viene inserito un codice PIN errato per 5 volte nell’arco di 3 ore, non è possibile
inviare alcun comando al televisore per 3 ore.
Trascorso questo tempo, il contatore del codice PIN viene azzerato.
Per attivare il timer, è necessario che il televisore si trovi in modalità standby.
5.96 Codice PIN, Italiano
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK