1.8 Specification guidelines for service use
MASTER LINK
Pin 1
Data- -0.25V ±0.1V
Pin 2
Data+ +0.25V ±0.1V
Pin 3
ML sense
Pin 4-10
N.C.
Pin 11
-supply voltage -7V to -15V (in standby -3V to -15V)
Pin 12
+supply voltage +7V to +15V (in s3V to +15V)
Pin 13
Audio -L 1V Bal, Rin 2.2Mohms, Rout 75ohms
Pin 14
Audio +L 1V Bal, Rin 2.2Mohms, Rout 75Mohms
Pin 15
Audio -R 1V Bal, Rin 2.2Mohms, Rout 75ohms
Pin 16
Audio +R 1V Bal, Rin 2.2Mohms, Rout 75ohms
S-VHS
Pin 1
Y GND
Pin 2
C GND
Pin 3
Luminance in (Y) 1 Vpp 75 ohms
Pin 4
Chrominance in (C) 1 Vpp 75 ohms
VIDEO
Composite video in 1Vpp 75 ohms
L & R
Audio L & R in 0.2V - 2 V RMS >10 kohms
PHONES
Ø 3.5 mm 220 ohms
POWER LINK FRONT & REAR
Pin 1
PL ON = >2.5V, OFF = <0.5V
Pin 2
Signal GND
Pin 3
Audio L out 0V - 2V RMS
Pin 4
PL speaker ON = >2.5V, OFF = <0.5V
Pin 5
Audio R out 0V - 2V RMS
Pin 6
Data: High >3.5V, Low <0.8V
Pin 7
Data GND
Pin 8
Not used
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK
