Bang & Olufsen BeoCenter 1, Repair Manual

Page: 174 / 545

VIDEO = audio/video mode.
ON (T*10) = shows how many times the set has been turned on from stand by.
DVD EJECT (T*10) = eject of the DVD loader.
DVD AUDIO = playback of CDA/DVD audio.
DVD VIDEO = playback of CDV/DVD video.
DVD ON (T*10) = shows how many times the DVD has been turned on.
RADIO = playing radio.
RADIO ON (T*10) = shows how many times the radio has been turned on.
(T*10) = The numbers are stated in interval of 10 (e.g. 10 = 100).
The number is given in full tens.
The values are stored in the EEPROM. If faulty readings of the values in the EEPROM
occur all service counter values will be set to 0.
SOUND ADJUSTMENTS
The sound adjustment is only necessary when replacing one of the speaker units.
A value of 9 makes a damping of 0 dB, a value of 0 makes a damping of 9 dB.
If the left-hand treble speaker has been replaced:
Place the cursor on LEFT TREBLE, now the sound will alternate between the left-
hand and the right-hand speakers.
Adjust by means of
l
and
n
until the sound pressure level is identical from both
channels.
Press GO to store.
If the adjustment failed, place the cursor on the FACTORY SETTINGS line, now the
values will be restored to factory settings.
Now repeat the adjustment.
AVC = Automatic Volume Control, can be set to OFF when measuring in the audio
circuits.The AVC is set to ON when the TV has been turned off by means of the
mains switch.
- MAX VOLUME LIMIT: Can e.g. be used to limit the max. volume regulations on TV´s
placed in hotel rooms.
- Software version for the Digital Surround Decoder (AC3). Is only shown if an AC3
decoder is present in the TV.
TELETEXT ADJUSTMENTS
WSS STATUS: Used for automatic switching to Digital Dolby Surround Sound if there
is WSS codes in the signal.
BROADCAST ONLY: Only switching on signal from the TV tuner.
DETECT ON: Switching on signals from all sources TV tuner, DVD playback, V TAPE
and AV sockets.
DETECT OFF: Used under certain conditions, e.g. a poor signal-to-noise ratio, the
detection may fail, which may entail faulty swithing.
Selecting “B&O LANGUAGE” makes it possible to choose among 7 different teletext
character sets.
0 English, German, Swedish, Italian, French, Portuguese, Slovak
1 Polish, German, Swedish, Italian, French, Croatian, Slovak, Rumanian
2 English, German, Swedish, Italian, French, Portuguese, Turkish
3 English, Russian, Estonian, Czech, German, Lithuanian, Ukrainian
4 English, German, Swedish, Italian, French, Portuguese, Turkish, Greek
5 English, Arabic, French
6 English, Hebrew, Arabic
Service Mode, English 5.9