Bang & Olufsen BeoCenter 1, Repair Manual

Page: 31 / 545

Service mode, English 5.9
DVD SERVICE MENU
- PCB72 software version number.
REGIONSETUP:
Region codes (1 - 11) if the region code has not been changed in this menu it will
be shown as a - (stroke). The DVD loader must be closed with no disc when the
region setup is performed.
REGIONSCOUNTER:
In this line it is shown how many times the region code has been changed.
Connection between primary/secondary TV colour systems and region codes:
Region 1 Region 2 Region 3 Region 4 Region 5 Region 6
NTSC/PAL 1 7 8 9
PAL/NTSC 2 3 4 5 6
NTSC/PAL N 10
PAL M/PAL 11
IMPORTANT!
The number of times to change the region setting is limited. If this limit is
exceeded the DVD will cease to funtion!
Region code according to type no.
Type no. Region code
8500 2
8502 3
8503 2
8505 4
8506 2
8508 2
PCB71 software version number:
- Exit Service Mode.
- Load a DVD and play it.
- Press DISPLAY ([GREEN] Beo4) until the OSD menu is shown.
- Press
l
to move to the left-hand side in the menu.
- Press
p
to move to the bottom of the menu.
- Press
n p p p
and the software version number is displayed.