Bang & Olufsen BeoCenter 1, Repair Manual

Page: 150 / 545

1.5 Specifi cation guidelines
Dolby® Digital Decoder
Decoding capabilities Dolby® Digital 5.1 channel decoding
Dolby® Pro-Logic decoding of two channel Dolby® Digital
Dolby® Pro-Logic decoding of two channel PCM
Dolby® Pro-Logic decoding of two analogue channels (Lt/Rt)
Automatic format detection(Dolby® Digital, PCM)
Calibration 3 channel Tone control & loudness (L/C/R)
Bass management, Delay management
Sound modes (Speaker 1 - 5) Speaker 1 : Stereo internal speakers(Subwoofer muted)
Speaker 2 2.0/2.1 : Stereo external speakers / Stereo external
sp Subwoofer
Speaker 3 3.0/3.1 : Dolby®-3 stereo / Dolby®-3 Subwoofer
Speaker 4 4.0/4.1 : Stereo-4 / Stereo-4 + Subwoofer
Speaker 5 5.0/5.1 : Dolby® Digital or Dolby® Pro-Logic
Surround / Dolby® D Subwoofer
Connections
Digital audio input
2 x Coax phono, Input-1 & 2
External BeoLab speakers 5 x Power Link (Left, Right, Rear left, Rear right, Subwoofer
Internal Center)
System modulator
Splitter/System modulator output to Link Room
(BeoLink Video Distribution)
Frequency range 479 - 831 MHz (in 1 MHz step), Dual side band
Video Automatic Gain Control
Audio Mono
According to type : FM sound system G : 5.5MHz,
FM sound system I : 6MHz
Connection 1 x 75 ohm aerial male
Optional
Digital Surround Sound (AC-3/DTS) 4064
Set-top box Controller 4060
Modulator system B/G 4016
Modulator system I 4018
Master Link module 4015
Floor stand, low 4186
Table stand 4185
Video stand, high gloss black 4189
Wall bracket 4188
Floor stand, high 4187 (plate)
4199 (tube)
4194 (base)
Dimensions W x H x D/Weight 61 x 73 x 42 cm/40 kg
Power consumption Typical 81 watts, St By 0.5 watts