Bang & Olufsen BeoCenter 1, Repair Manual

Page: 176 / 545

Region 1 Region 2 Region 3 Region 4 Region 5 Region 6
NTSC/PAL 1 7 8 9
PAL/NTSC 2 3 4 5 6
NTSC/PAL N 10
PAL M/PAL 11
- Sets the search level to “First Stop”, meaning that the tuning will stop on more
weak stations during test mode than in normal operation.
- Removes 20 dB damping on strong stations.
DVD SERVICE MENU
PCB72 software version number.
REGIONSETUP:
Region codes (1 - 11) if the region code has not been changed in this menu it will
be shown as a - (stroke). The DVD loader must be closed with no disc when the
region setup is performed.
REGIONSCOUNTER:
In this line it is shown how many times the region code has been changed.
Connection between primary/secondary TV colour systems and region codes:
IMPORTANT!
The number of times to change the region setting is limited. If this limit is
exceeded the DVD will cease to funtion!
Region code according to type no.
Type no. Region code
8520 2
8522 3
8523 2
8525 4
8526 2
8528 2
PCB71 software version number:
- Exit Service Mode.
- Load a DVD and play it.
- Press [BLUE] on Beo4 until the on-screen tool bar is shown.
- Press
l
to move to the left-hand side in the menu.
- Press
p p p p
to move to the bottom of the menu.
- Press
n p p p p p
and the software version number is displayed.
To get access to a PIN-code protected DVD
- Load an audio CD not a DVD.
- Press GO then [BLUE] on Beo4 until the on-screen tool bar is shown.
- Press
l
to move to the left-hand side in the menu.
- Press
p p p p
to move to the bottom of the menu.
- Press
n
to move the function menu. Access control is already highlighted.
- Press
n
to be able to enter a four digit PIN-code.
- Press STOP four times to annul the code.
Service Mode, English 5.11