Bang & Olufsen BeoCenter 1, Repair Manual

Page: 33 / 545

CUSTOM LNB SETUP
This setting up guide only has to be used if the customer has a special LNB setup
and not an universal LNB.
For normal operation see brief operation guide.
Select the “SAT TUNING” menu.
Select the “LNB SETUP” line and press GO .
Register the LNB setup in the order that corresponds to the manner in which the
specifi c LNBs are connected to the LNB switch. It is possible to select 4 LNBs in a
setup. After having stored this setup the TV returns to the “SAT TUNING” menu.
In the “SAT TUNING” menu press STOP STOP GO within 3 seconds, now the
“CUSTOM LNB SETUP” menu appears.
Select a LNB number.
The table shows the options for setup of the LNBs:
LNB-SELECT DiSEqC SWITCH TONE DC NONE
OPTION . . . . . . 14V/18V/14V-T/ ON/OFF 14V/18V . . . . . .
18V-T
LNB BANDS DUAL/SINGLE DUAL/SINGLE DUAL/SINGLE DUAL/SINGLE DUAL/SINGLE
BAND SELECT TONE/DC/DiSEqC DiSEqC DC /DiSEqC TONE /DiSEqC TONE/DC/DiSEqC
FREQUENCY . . . . . . . . . . . . . . . . . . . . . . . .
(Dual)
FREQUENCY- 10.600/10.750 10.600/10.750 10.600/10.750 10.600/10.750 10.600/10.750
HIGH
FREQUENCY- 9.750/10.000/ 9.750/10.000/ 9.750/10.000/ 9.750/10.000/ 9.750/10.000/
LOW 10.050 10.050 10.050 10.050 10.050
POLARITY TONE/DC/DiSEqC DiSEqC DC /DiSEqC TONE /DiSEqC TONE/DC/DiSEqC
If LNB BANDS is set to SINGLE, BAND SELECT and FREQUENCY-HIGH cannot be
entered.
Custom LNB setup, English 5.11