B&K 2250 Light, User Manual, Page: 29 / 208

CHAPTER 3
Making Your First Measurement
19
Fig.3.4
Measurement
feedback in the
status field
5) Toggle between different display parameters, as required, by tapping on each parameter
field (for example LAF90.0 in Fig.3.4) with the stylus and selecting other parameters
from the drop-down lists that appear.
Note: The tabs at the bottom of the screen allow you to choose different ways of
displaying the measurement results:
• The Broadband view shows an instantaneous L
AF
readout, with associated bar graph
and four measurement parameters, followed by two measurement setup parameters.
(The first parameter is displayed in a larger font size for better readability, see
Fig.3.4.)
• The XL View increases the size of the first parameter readout to a 4 digit, full-screen
display (including decimal point)
6) Set Measurement Mode to Automatic and choose a preset time for your measurement.
Then repeat steps 3 and 4. The measurement will automatically pause after the preset
time. This allows you to either save your measurement or continue measuring, as required.
7) Tap the Main Menu icon and select Setup from the list of options, see Fig.3.5.