B&K 2250 Light, User Manual, Page: 180 / 208

2250 Light – User Manual 170
D.8 Network Settings
Table D.8 Network settings parameters
Parameter Values Comment
Location Up to 20 characters Use Location to specify a text identifying
the analyzer or location of the analyzer.
The Location will be displayed on the PC
together with the serial number of the
analyzer when browsing for analyzers in
BZ-5503, and when connected using the
on-line display
Network Connection None
CF Socket
LAN Socket Set to None if no Ethernet CF Card is
present in CF Socket
Set to CF Socket if Ethernet CF Card is
present in CF Socket (hardware versions
1 – 3 only)
Set to LAN Socket if you want to use the
built-in LAN Socket on hardware version 4
Set IP Address Automatically
Manually Set to Automatically to obtain an IP
address from a DHCP server - if no server
available, then a Link-local address will be
set
Set to Manually to set the IP address ,
Subnet Mask , Default Gateway , Preferred
DNS and Alternate DNS manually
IP Address xxx.xxx.xxx.xxx The IP address of the instrument
Selectable if Set IP Address = Manually
Subnet Mask xxx.xxx.xxx.xxx The Subnet Mask combined with the IP
address identifies the network segment the
analyzer is on
Selectable if Set IP Address = Manually
Default Gateway xxx.xxx.xxx.xxx Address to a gateway for routing to
another network
Selectable if Set IP Address = Manually
Preferred DNS xxx.xxx.xxx.xxx The IP address of the primary DNS server
Alternate DNS xxx.xxx.xxx.xxx The IP address of the secondary DNS
server