Bandai Namco Time Crisis 5, Operation Manual, Page: 85 / 194

8B. Service
85
Service
- Must be performed by a technician -
Test Mode
Tro
ub
les
ho
otin
g
1
2
3
4
5
6
7
8A
8B
9
10
11
8B-2 Troubleshooting
●
In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the power switch before starting this task.
●
For a problem in which the descriptions in P-91 "8B-3 Error Displays" or P-85 "8B-2 Troubleshooting"
cannot be applied, or if corrective action(s) taken do not result in an improvement, turn off the power
switch immediately to stop machine operations, then contact your distributor. Continuing to operate the
machine may cause an accident.
WARNING
●
INever test the PC board for continuity inspection, using a tester or other devices. We will
repair it.
●
The internal voltage of the tester may damage the IC.
●
When requesting repairs (or placing an order for parts), fill out the "Repair Request Form" (or
the "Parts Order Form") provided at the end of the manual, and fax it to your distributor in
advance. Copy the form for this purpose.
●
When sending parts for repair, pack them carefully. When sending a game PC board, wrap
it in a sponge or bubble wrap and place it in a corrugated cardboard box to protect it
against external impact.
●
Be sure to attach the "Repair Request Form" to parts being sent for repairs.
8B-2-1 Overall
Symptom Cause Solution
Reference
section
·The machine does not
start.
·The USB dongle is not inserted
correctly.
·Correctly insert the USB dongle.
P-78
·A connector is disconnected. ·Connect the connector. P-65–80
·The game PC board is
malfunctioning.
·Contact your distributor.
–
·Operation is not stable
or the machine operates
incorrectly.
·The power supply voltage is
outside the range of 110 to 130
VAC.
·Disconnect any high-capacity devices
(such as an air conditioner or large
machines) from the same line to obtain
the specified power supply voltage.
–