Bandai Namco Time Crisis 5 Operation Manual Download

Page: 2 / 194

Introduction

Thank you very much for purchasing Time Crisis 5 (referred to as "the machine" in this Operation Manual).

This Operation Manual describes:

•

How to safely install, operate, move, transport, maintain and dispose of the machine.

•

How to make full use of the machine's functions and operate it correctly.

•

How to ensure the safety of players and bystanders.

Contact for machine and machine repair inquiries

•

For inquiries regarding the machine or machine repairs, contact your distributor.

(Authorized in September 2014)

BANDAI NAMCO Games manages and identifies the chemical substances contained in our

products through our green procurement standard. The machine described in this manual is

environmentally friendly and designed to reduce power usage (through the use of power-saving

materials), save resources (cabinets designed to increase transport efficiency and reduce

packaging materials), and be easily recycled (designed to be disassembled easily).
More information on

can be found on our official website.

Summary of Contents for Time Crisis 5



































































































































































































Search results

Summary of Contents for Time Crisis 5

Reviews:

Related manuals for Time Crisis 5

Brands by name

Popular brands

Bandai Namco Time Crisis 5, Operation Manual

Search results

Summary of Contents for Time Crisis 5

Reviews:

Related manuals for Time Crisis 5

Brands by name

Popular brands