Bandai Namco Time Crisis 5 Operation Manual Download

Page: 135 / 194

8B. Service

135

- Must be performed by a technician -

Test Mode

Tro

les

otin

Service

Raise the pedal cover on the photosensor to be replaced.

Disconnect the connector, remove the Phillips pan head screw (M4 x 10), and replace the
photosensor.

Pedal assembly

Photosensor

Pedal cover

Connector

Phillips pan head screw (M4 x 10)

Repeat the procedure to replace the photosensor on the other side.

To install, perform the procedure in reverse.

After replacing the photosensor, be sure to check the operations. (See P-49 "7-7-5 Input/
Output Test of Switches (I/O TEST)".)

●

When installing, be sure to securely lock the connectors.

●

When installing, take care not to allow the connectors and harnesses to get caught.

Summary of Contents for Time Crisis 5



































































































































































































Search results

Summary of Contents for Time Crisis 5

Reviews:

Related manuals for Time Crisis 5

Brands by name

Popular brands

Bandai Namco Time Crisis 5, Operation Manual

Search results

Summary of Contents for Time Crisis 5

Reviews:

Related manuals for Time Crisis 5

Brands by name

Popular brands