Bandai Namco Time Crisis 5, Operation Manual, Page: 131 / 194

8B. Service
131
- Must be performed by a technician -
Test Mode
Tro
ub
les
ho
otin
g
1
2
3
4
5
6
7
8A
8B
9
10
11
Service
■
Replacing the micro switch for the trigger
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2 Remove the gun body (R).
(See
2
in P-124 "(2) Replacing the sensor unit".)
3
Remove the spring and remove the trigger.
4
Disconnect the connector to remove and replace the micro switch for the trigger.
Connector
Engage the spring here.
Spring
Trigger
Micro switch for the trigger
5
To install, perform the procedure in reverse.
6 After replacing the micro switch, be sure to check the operations. (See P-49 "7-7-5 Input/
Output Test of Switches (I/O TEST)", P-47 "(1) SIGHT CALIBRATION (Gun Sight Calibration
Screen)".)
●
Be sure to engage the spring with the trigger.
●
When installing, be sure to securely lock the connectors.
●
When installing, take care not to allow the connectors and harnesses to get caught.