Bandai Namco Time Crisis 5, Operation Manual, Page: 35 / 194

7. Operation
35
1
2
3
4
5
6
7
8A
8B
9
10
11
Operation
Tro
ub
les
ho
otin
g
Test Mode
7-4-2 Safety Inspection (After Power On)
Inspect the following points after turning on the power switch. If you discover an abnormality, turn off the
power switch immediately to stop operations. Then, disconnect the power cord plug from the outlet and
contact your distributor.
(1) Is any part of the power cord or plug abnormally hot?
(2) Does touching the machine give a tingling electric shock?
(3) Are there any burning smells, abnormal noises or vibrations?
(4) Are there any other abnormalities or malfunctions?
7-4-3 Function Inspection (After Power On)
Turn the power switch on, and check the following items. (See P-39 "7-6-1 Turning the Power Switch ON".)
(1) Check the audio. (Is sound being emitted from each speaker?) (See P-54 "7-7-7 Sound Test".)
(2) Check the LED modules on the signboard (L) and (R) assemblies. (Do the LED modules light up?)
(3) Check the light-emitting unit. (Does the light-emitting unit light up?)
(4) Check the tower and floor LEDs. (Do the LED modules light up?)
(5) Check the images on the LCD monitor. (See P-53 "7-7-6 Monitor Test".)
To inspect the following points, press the Service switch and play the game.
(See P-41 "7-6-2 Adjustment Switches".)
(6) Check the operation of the gun assembly.
* If the gun sight is not aligned correctly, adjust the gun sight. (See P-47 "(1) SIGHT CALIBRATION (Gun Sight
Calibration Screen)".)
(7) Check the operation of the pedal assemblies.
(8) Check all switch operations. (See P-49 "7-7-5 Input/Output Test of Switches (I/O TEST)".)
●
Do not install the machine in the following locations. Doing so may cause the sensor to fail
to detect the position of the gun assembly.
• A location where the gun assembly or monitor surface is exposed directly to sunlight,
the rays of spotlights, or other intense light sources.
• A location where there is a large contrast between light and dark due to a blinking
bright light source.
●
Install the pedal assemblies correctly so that they are not floating above the floor.