Bandai Namco Time Crisis 5, Operation Manual, Page: 49 / 194

7. Operation
49
1
2
3
4
5
6
7
8A
8B
9
10
11
Operation
Tro
ub
les
ho
otin
g
Test Mode Test Mode
7-7-5 Input/Output Test of Switches (I/O TEST)
This screen is used to test each switch and control for input/output.
1 In the MENU screen, select I/O TEST using the Select switch and press the Enter switch. The
I/O TEST screen appears.
I/O TEST screen
Item Description Setting
(a) LINK
Displays the communication status between the
cabinets.
ON
OFF
NG
(b) LINK AS Displays the CPU ID status.
1(LEFT)
2. (RIGHT)
(1) SWITCH TEST
Tests switch inputs.
See P-50 "(1) SWITCH TEST".
(2) LED TEST
Tests LEDs.
See P-51 "(2) LED TEST".
(3) LINK TEST
Tests link between the cabinets.
See P-52 "(3) LINK TEST".
(c) I/O PCB
Displays the PCB CHECK status.
In a normal state, CONNECT OK appears in green.
In an abnormal state, CONNECT NG! appears in red.
(d) Displays the transmitted data without modification.
2 Select an item using the Select switch. The selected item blinks.
3 Press the Enter switch to enter the selected item.
4 After entering the selection, flip the Select switch up or down to change the item setting.
5
After changing the setting, press the Enter switch to return to the item selection screen.
6
Select EXIT and press the Enter switch to return to the MENU screen.