Bandai Namco Time Crisis 5, Operation Manual, Page: 24 / 194

24
5. Delivery and Installation Conditions
●
Install the machine according to the instructions in this Operation Manual. Failure to follow these
instructions may result in fire, electric shock, injury or malfunction.
●
Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in fire or
burns.
●
Be sure to install the ground wire. Failure to install the ground wire may result in electric shock in the
event of electrical leakage. (See P-79 "8A-6 Connecting the Power Cord and Ground".)
●
Install the machine securely by using the level adjusters. Unstable machine installation may result in
accident or injury. (See P-77 "8A-4 Level Adjuster Adjustment".)
WARNING
5-1 Installation Conditions
5-1-1 Locations Where the Machine Should Not Be Installed
●
This machine is designed for indoor use. Never install the machine outdoors or in the following locations.
• A location exposed to direct sunlight
• A location exposed to rain or water leaks
• A damp location
• A dusty location
• A location close to heaters
• A hot location
• An extremely cold location
• A location exposed to condensation caused by temperature differences
• A location that obstructs an emergency exit or fire extinguishing equipment
• An unstable location or a location exposed to vibration
WARNING
●
Do not install the machine in the following locations. Doing so may cause the sensor to fail
to detect the position of the gun assembly.
• A location where the gun assembly or screen surface is exposed directly to sunlight, the
rays of spotlights, or other intense light sources.
• A location where there is a large contrast between light and dark due to a blinking
bright light source.
(See P-46 "7-7-4 Gun Test".)