manualshive.com logo in svg

Bandai Namco Time Crisis 5, Operation Manual, Page: 122 / 194

Share
Download
Bandai Namco Time Crisis 5 Operation Manual Download Page 122

8B.  Service

122

- Must be performed by a technician -

8B-4-5  Gun Assembly

(1)  Replacing the gun assembly

 

●

In order to avoid electric shock, accident or injury to yourself or others as well as damage to the 
electronic circuits, be sure to turn off the power switch before starting this task.

WARNING

1 

Turn off the power switch. (See P-81 "8A-8 Turning the Power Switch On".)

2 

Remove the two Torx bolts (M5 x 12) from the bottom of the gun tower (L) assembly and 
open the gun tower bottom cover.

Gun tower (L) assembly 
(bottom)

Gun tower 
bottom cover 
(opened)

Gun tower bottom cover

Torx bolts (M5 x 12)

3 

Disconnect the two connectors and remove the two countersunk washer nuts (M5) and the 
two countersunk washer nuts (M6).

[View from the bottom looking up]

Gun tower (L) assembly
 (bottom inside)

Connectors

Countersunk washer nuts (M6)

Countersunk 
washer nuts (M5)

Summary of Contents for Time Crisis 5



































































































































































































Reviews:

No comments