Balluff BTL7-P511-M J-DEXC-TA12 Series, User Manual

Page: 41 / 182

www.balluff.com 5 english
1.1 Validity
This guide describes the construction, function and setup
options for the BTL magnetostrictive position measuring
system with digital interface. It applies to types
BTL7-P511-M _ _ _ _ -J-DEXC-TA12
(see Type code
on page 23).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BTL.
1.2 Scope of delivery
– BTL
– 6 mounting screws
– User’s guide (incl. declaration of conformity)
Conduit is not included in scope of delivery.
You can find the declaration of conformity for
your specific device in the download area at
www.balluff.com
. Please enter the type
designation or the order code in the search
field.
Magnets/floats are available in various models,
which is why they must be ordered separately
(see Accessories on page 21).
1.3 Qualified personnel
This user’s guide is intended for technical personnel who
have the appropriate knowledge for proper selection,
installation, and operation.
1.4 Languages
The English version of this user’s guide shall be considered
the original operating instructions. Versions in other
languages are translations of the original user’s guide. The
information in the original user’s guide will apply if the
contents of the translated versions are not clear or the
information is contradictory.
Do not start up the BTL if you do not have a user’s guide in
the language of the country where the product will be
used. In such cases, please contact Balluff.
1.5 Symbols and conventions
Individual
instructions
are indicated by a preceding
triangle.
►
Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.6 Explanation of the warnings
Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Hazard type and source
Consequences if not complied with
►
Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a hazard that could
damage
or
destroy the
product
.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury .
1.7 Disposal
►
Observe the national regulations for disposal.
1
Notes to the user
BTL7-P511-M _ _ _ _ -J-DEXC-TA12
Magnetostrictive Linear Position Sensor – Rod Style
Ignition protection “d”
Flameproof enclosure