Balluff BES M08EH1-L01C20B-S04G-L04, Configuration Manual

Page: 144 / 194

46 english
Speed Monitoring Startup Delay
With
Startup Delay
, the time for the startup delay can be
set. The startup delay begins after the supply voltage is
switched on. During the startup delay, speed monitoring
has no function. Speed monitoring starts after the startup
delay has elapsed. The value represents the time in
seconds. The value range is between 0x00 (0) and 0xFF
(255). A value of 0x00 (0) represents no start delay.
Speed Monitoring State
With
Speed Monitoring State
, the current status can be
read.
Value Meaning Description
0x00 (0) Idle No speed value yet available
0x01 (1) Too low Speed value is less than the
lower threshold
0x02 (2) OK Speed value is in the suitable
range
0x04 (4) Too high Speed value is greater than
the upper threshold
0x08 (8) Startup
Delay
Startup delay currently
running
0xFF (255) Deactivated Feature is deactivated
Tab. 5-12: Signal Speed Monitoring – Speed Monitoring State
Speed Monitoring Value
With Speed Monitoring Value , the current speed value can
be read.
5.3.5 System Commands
Command
Value
Device Action
0x81 (129) Application Reset – Resets writable
parameters to the default value.
0x82 (130) Reset Factory Settings – Resets writable
parameters to the default value.
0xAA (170) Signal Speed Monitoring Reset – Resets
the speed value and flags.
Tab. 5-13: Signal Speed Monitoring – System Commands
For an overview of all System Commands, see section 3.5
on page 21.
5
Secondary Device Functions (continued)
BES M08EH1-L01C20B-S04G-L04 /BES M12E_1-L01C_0_-S04G-L04 /
BES M18EH1-L01C_ _ _-S04G-L04
Inductive sensors