10. Linear Triple Calendar
MODELS: CM1030, CM1032
The triple calendar function may be also known as the “Month, Day, Date”
feature. The Trainmaster Racer and Trainmaster Doctor’s Chronograph
introduce a BALL in-house development, the Linear Triple Calendar
function. This feature shows the month, the day and the date in a row at the
3 o’clock position for ease of use.
To set the functions, unscrew the crown and pull it out to position [1].
• Date setting: Turn the crown clockwise until the correct date is reached.
• Day setting: Turn the crown counterclockwise until the correct day is
reached.
• Month setting: The month function is set in the same manner as the date.
By rotating the date through all 31 days, the month wheel will move forward
to the next month.
In order to prevent damages to the date-switching mechanism, we advise
not to manually reset the Linear Triple Calendar between 8PM and 2AM.
26
27
Compass:
It displays the direction based on time and position of the sun.
MODELS: DC2036, DC3036
The Engineer Hydrocarbon Spacemaster Orbital (DC2036) and Spacemaster
Orbital II (DC3036) can be used as a compass synched to the sun or to store
relative position with a separate compass.
First remove the watch from the wrist and turn it until the local hour hand
points at the sun. Find the point halfway between the hour hand and 12
o’clock. Turn the outer compass bezel to set South to that point, then all
other cardinal points are displayed on the compass bezel. Please note, in
the Southern hemisphere, the point between the sun and 12 o’clock will be
North instead of South. (see Figure 1).
Adjust the time backward one hour during Daylight Saving Time.
When using to determine relative position, first turn the watch in order for the
“N” marking on the inner bezel to face North, then turn the outer compass
bezel to the necessary offset (e.g. 10°) from the inner bezel. (See Figure 2)
Fig.1 Fig.2
ENGLISH
Summary of Contents for NM2038
Page 251: ...001 TM ...
