Using the Keypad
6-3
6.4
About Parameters
To program the drive for a specific application, you adjust the appropriate parameters. The
parameters are used to define characteristics of the drive.
There are three types of parameters:
•
Numbered List Parameters (Enumerated Parameters)
Numbered list parameters allow a selection from two or more options. Each item is
represented by a number.
Example: Start/Stop Source (P38)
•
Bit Parameters
Bit parameters have individual bits associated with features or conditions. If the bit is 0, the
feature is off or the condition is false. If the bit is 1, the feature is on or the condition is true.
Example: Terminal Status Display (d7)
•
Numeric Parameters
These parameters have a single numerical value (for example, 0.1 volts).
Example: Motor Rated Current (P32)
Parameters are also either configurable or tunable, or read-only.
Configurable parameters can be adjusted or changed only while the drive is stopped.
Speed
Reference
Keys
Operation Mode:
•
Changes the commanded speed reference.
•
Only active when the input mode is programmed for
keypad control.
•
The Up-Arrow increases the speed reference at a
controlled rate.
•
The Down-Arrow decreases the speed reference at
a controlled rate.
•
Holding either arrow for a set period of time will
increase the reference ramp rate.
Program Mode:
•
Increment / Decrement parameter numbers or
parameter values
Direction
Keys
Operation Mode:
•
Only active when the input mode is programmed for
keypad control.
•
Direction keys are active only when operating in
reference command mode.
•
Reverse may also be disabled by a parameter.
Program Mode:
•
Cycle through the parameter groups or shift to
the next digit to be changed while in the
parameter edit mode.
Table 6.2 – Key Descriptions (Continued)
Key
Name
Description
Summary of Contents for VS1MD
