d. Disassemble
With a soft hammer lightly tap the main driv
-
ing gear (1) and remove (with thrust pad (2)
and bearing (3))
CAUTION:
Remove the main driving gear first if it is nec
-
essary to replace the gear. Replace the original
bearing thrust pad, do not reuse.
e. Disassemble:
1) Oil seal (1)
2) Bearing (2) (shift gear)
Properly support rear driving gear case and use
proper pressure assemble tool (3)
f. Disassemble:
Bearing (1) (main driving gear)
Procedures for disassembly:
1) Heat up the rear driving gear case to 150°C
2) With a proper punching pin (2) , remove
the outer circle of bearing.
3) On the main driving gear remove the inner
circle of bearing.
CAUTION:
Removing the inner circle of the main driving
gear bearing is difficult and generally unneces
-
sary.
76
Summary of Contents for WD250U
