Section 11 Inspection of Lighting System
(II) If headlight is out
1. Bulb and socket
• Check if the bulb and socket are correct
PASS
2. Voltage
• Connect the pocket tester (DC 20V) to the
headlight
A B
Multimeter (+) - green terminal (1) or yel
-
low terminal (2)
Multimeter (-) - black terminal (3)
[A] When switch is in “LOW” position
[B] When switch is in “HI” position
• Turn main switch to “ON” position
•Turn lamp switch to “LOW” or “HI” position
• Check the voltage of green and yellow wires
in coupler of bulb socket
PASS
No failure on this circuit
No electricity
Replace bulb and socket
Out of specification
If there is failure on the cicuit from main
switch to bulb socket coupler, repair it
135
Summary of Contents for WD250U
