Baja WD250U, Service Manual

Page: 39 / 232

2. Installation
Reverse procedure for “Disassembly”. Pay at -
tention to the following points:
1- Install:
Rear fender (1)
Bolt (2) (rear fender and frame). The
torsion in 7N·m.
Bolt (3) and rubber hood of protecting plate
(rear fender and frame). The torsion is 7N·m.
2- Install:
a.Battery (1)
b.Battery clamp plate (2)
3- Install:
a. Cut-ff relay (3)
b.Starting relay (4)
c.Connect the positive wire (6) to battery
d.Connect the negative wire (5) to battery
4- Install the cushion (1)
CAUTION:
Insert the support lug (2) of cushion into the
plug seat (3) on the frame, then press down on
the seat.
5- Install rear luggage carrier (1)
Torque requirement for fasteners:
Bolt (2) fastening torque: 3N·m
Bolt (3) fastening torque: 9N·m
CAUTION:
Remember to install the bushing on the con -
necting point of luggage carrier and frame.
6
5
4
3
1
2
2
1
3
1
2
3
1
2
3
39