THERMOMASSEUR
®
|
OWNER’S MANUAL
7
www.bainultra.com
Printed in Canada. Copyright © May 2017 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
THERMOMASSEUR
®
1-3
1-4
1-5
A
1 - 1
1/2
"
[2.5 à 3.8 cm]
THERMOMASSEUR
®
THERMOMASSEUR
®
The BainUltra
®
ThermoMasseur
®
is almost as easy
to install as a conventional bath. The following
instructions outline steps to follow for the main
types of installation.
THERMOMASSEUR
®
INSTALLATION
IMPORTANT
• The Thermomasseur
®
must sit entirely on its base with the lip supported by a wooden structure.
• The Thermomasseur
®
must be level.
• The Thermomasseur
®
is molded with an integrated slope towards the drain. If decking around
the Thermomasseur
®
is level, the bath will drain accordingly.
1. ALCOVE INSTALLATION (BETWEEN
2 OR 3 WALLS)
Install to permit access for servicing.
The following instructions apply to both rectangular
and corner baths.
1-2
1-1
1-1
Place level lengthwise on decking of the
ThermoMasseur
®
and adjust by placing
shims under ThermoMasseur
®
where
necessary. Repeat exercise width wise on
the bath. Glue shims in place with a drop
of silicone.
1-2
Mark position of wooden supports to be
attached to the wall by tracing a line
underneath the deck of the ThermoMasseur
®
.
1-3
Pull the ThermoMasseur
®
out.
1-4
Align the wooden supports [at least 1 1/2”
(3.8 cm) thick] with markings and nail into
place on the wall studs. Plan for notch on
wooden supports for installation of a skirt
if necessary
1-5
Reposition ThermoMasseur
®
and verify that
it is level.
THERMOMASSEUR
®
- INSTALLATION
