18
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © May 2017 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
THERMOMASSEUR
®
OWNER’S MANUAL |
THERMOMASSEUR
®
ORIGAMI FREESTANDING DESIGN SERIES - PAR TS AND TOOLS - SITE PREPARATION
ORIGAMI FREESTANDING
DESIGN SERIES
PARTS AND TOOLS
ORIGAMI FREESTANDING
DESIGN SERIES
SITE PREPARATION
A. PARTS INCLUDED
A-1
Anchor points
A-2
Installation template
A-3
Flexible 1 1/2” pipe for overflow
A-4
Access panel
A-5
Access panel hinge
B. TOOLS REQUIRED
B-1
48-inch level
The Origami Freestanding Design Series requires
a 12” x 10” (30 cm X 25 cm) compartment for the
drain, distance air inlet and, if applicable, space
for control cables and options. Refer to the instal-
lation template.
ACCESS AND AIR INLET
For this model, the turbine is not installed on the bathtub.
Determine a location near the bathtub at a maximum distance
of 15 feet or (4.6 metres) under the floor, in a cabinet or any other
location to conceal the turbine and optional accessory casings,
if applicable. The location chosen must also be accessible and allow
sufficient air intake for the turbine.
(See
TURBINE – REMOTE MOUNTING INSTALLATION section).
A-3
A-2
A-1
A-4
A-5
A-3
A-2
A-1
A-4
A-5
A-3
A-2
A-1
A-4
A-5
A-3
A-2
A-1
A-4
A-5
A-3
A-2
A-1
A-4
A-5
B-1
B-2