OWNER’S MANUAL |
TURBINE
24
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) . From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © May 2017 BainUltra Inc. All rights reserved. 45220001
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
TURBINE
TURBINE
REMOTE MOUNTING INSTALLATION
All bath components are factory-installed. If you
wish to relocate the turbine and InMix module
(Chromatherapy) for practical or accessibility rea-
sons, follow these instructions. Failure to follow
these instructions could result in serious personal
injury or and/or property damage. Failure to follow
these instructions will void the warranty for the
ThermoMasseur
®
and BainUltra
®
shall not be responsible
for any damage, loss, cost, expense or liability
relating to failure to follow these instructions.
Choose a location not requiring more than
six
elbows (directional changes) and 15 ft. (4.6 m)
of piping to the bath
. Choose the shortest possible
distance between bath and turbine to insure the
system’s performance. Sufficient space and ventila-
tion is necessary for proper air circulation. Ambient
air temperature should be between 72°F (20°C) and
86°F (30°C). Easy access to system must remain
possible at all times for servicing.
Turbine may be relocated in either a vertical or a
horizontal position.
Use only 1 1/2” (3.8 cm) ABS
or PVC non-flexible pipes and adaptors to extend
air line; the use of flexible pipes is not
recommended (except when factory-installed)
.
Whenever possible, use two 45° elbows to change
the direction of your piping. All air line pipe connections
should be glued together
except for connections
to the turbine, air-heater of the double heated
backrest of the Amma
®
serie and air entry on the
bath which are secured in place with screws
.
The turbine must be mounted at least 4” (10 cm)
from the floor.
To reduce heat loss, use insulating
material along the entire air line
. Bath is delivered
with a 15 ft. (5 m) cord to connect the electronic
control to the turbine. If necessary, extensions are
available through a retailer. To relocate turbine, refer
to directions and illustrations on following pages.
LOCATION
TURBINE INSTALLATION
• A waiting period of 24 hours is necessary before using turbine if pipes have been glued together.
WARNING
IMPORTANT
• If the ThermoMasseur
®
comes with LED Chromatherapy system, InMix module must always be
moved with the turbine.
TURBINE - REMOTE MOUNTING INSTALLATION
