INTRODUCTION
SPECIFICATIONS (continued)
1 - 10
I-E96-301B
®
SPECIFICATIONS
(continued)
Maximum Lead Wire Resistance Effect
Voltage Input
Uncompensated
Compensated
1 microvolt of error per Ohm of lead wire resistance
0.1 microvolt of error per Ohm of lead wire resistance
3-Wire Resistance Inputs
Uncompensated
Compensated
0.020 Ohms of error per Ohm of lead wire resistance
0.008 Ohms of error per Ohm of lead wire resistance
Resolution
Programmable, 16 to 24 bits, in steps of two
over full scale resolution
Temperature Effect
(0 - 70° C)
± 0.003% of full scale range per degree C maximum
Power Supply Effect
Over Operating Range
(± 15 Volt Supplies)
± 0.003% of full scale range per Volt maximum
Input Setting
Time
0.5 seconds to within 1% after full scale step change
Input Impedance
10 MOhm minimum
Common Mode Isolation
Continuous AC Voltage
(Absolute Maximum)
250 VRMS
Channel/Channel
(Absolute Maximum)
250 VRMS
50/60 Hz Rejection
(Minimum)
-110 dB
Resolution
(Bits of A/D)
Resolution
(Percent of A/D Span)
Typical A/D Conversion
Times Per Channel
16
0.0015
30 ms
18
0.00038
175 ms
20
0.000095
175 ms
22
0.000024
450 ms
24
0.000006
2000 ms
