20
20
3. Insert the draw bar (A) through the bottom of the
quill, making sure that the beveled edge of the
drawbar nut (B) is facing upwards. (Fig. 10)
Fig. 10
4. Use the spindle wrench to hold the top flats on the
spindle while tightening the draw bar nut using an
open end wrench. (Fig. 11)
Fig. 11
Summary of Contents for SS-2822
