Baileigh SS-2822, Operator'S Manual

Page: 16 / 64

13
13
UNPACKING AND CHECKING CONTENTS
Your Baileigh machine is shipped complete. Separate all parts from the packing material and
check each item carefully. Make certain all items are accounted for before discarding any
packing material.
Remove shaper from the shipping cartons. Check for
damage and ensure all parts are intact. Any damage
should be reported immediately to your distributor and
shipping agent. Before assembling, read the manual
thoroughly, familiarizing yourself with correct assembly and
maintenance procedures and proper safety precautions.
To ensure maximum performance from your spindle
shaper, clean it properly; and install it accurately before
use.
As soon as you receive the spindle shaper, we recommend
you follow these procedures;
1. Inspect packing crate for damage in transit. Record
damage, and report it immediately to shipper.
2. Open crate and check that machine arrived in good
condition. If not. Let your industrial distributor know
immediately.
3. Before lifting machine, remove all foot bolts locking it to its
shipping base.
4. Transport machine to location with a hand truck or dolly.
5. Do not use solvents on plastic parts and electric cord;
solvents dissolve or damage plastic and electric cord.
WARNING:
SUFFOCATION HAZARD! Immediately discard any plastic
bags and packing materials to eliminate choking and suffocation hazards to children
and animals.
If any parts are missing, DO NOT place the machine into service until the missing
parts are obtained and installed correctly.