29
29
Belt Tension
The belt tension is set at the factory and should
not need adjustment on initial setup. The belt will
need occasional adjustment as the belt will stretch
over time. The belt shoul
d yield 1/4” of deflection
when squeezed together at the midpoint.
1. Loosen the two hex head bolts (A, Fig. 22).
2. Slide the motor and bracket assembly (B)
away from the spindle cartridge (C) until the
slack is removed from the belt.
3. Retighten the two hex bolts loosened in step 1.
Fig. 22
Summary of Contents for SS-2822
