Baileigh Industrial BS-330M, Operator'S Manual

Page: 14 / 68

11
11
TRANSPORTING AND LIFTING
Follow these guidelines when lifting with truck or
trolley:
•
The lift truck must be able to lift at least 1.5 – 2 times
the machines gross weight.
•
Make sure the machine is balanced. While
transporting, avoid rough or jerky motion, and maintain
a safe clearance zone around the transport area.
•
Use a fork lift with sufficient lifting capacity and forks
that are long enough to reach the complete width of
the machine.
•
Remove the securing bolts that attach the machine to
the pallet.
•
Approaching the machine from the side, lift the
machine on the frame taking care that there are no
cables or pipes in the area of the forks.
•
Move the machine to the required position and lower
gently to the floor.
•
Level the machine so that all the supporting feet are
taking the weight of the machine and no rocking is
taking place.
Follow these guidelines when lifting crane or hoist:
•
Always lift and carry the machine with the lifting holes
provided at the top of the machine.
•
Use lift equipment such as straps, chains, capable of
lifting 1.5 to 2 times the weight of the machine.
•
Take proper precautions for handling and lifting.
•
Check if the load is properly balanced by lifting it an
inch or two.
•
Lift the machine, avoiding sudden accelerations or
quick changes of direction.
•
Locate the machine where it is to be installed, then lower slowly until it touches the floor.
NOTICE: Lifting and carrying operations should be carried out by skilled workers, such as a
truck operator, crane operator, etc. If a crane is used to lift the machine, attach the lifting chain
carefully, making sure the machine is well balanced.