Baileigh Industrial BS-330M, Operator'S Manual

Page: 30 / 68

27
27
COMBO TOOTH: 9° - 10° positive rake.
This type of blade is the most suitable for the cutting of section bars and large and thick pipes as
well as for the cutting of solid bars at maximum machine capacity. Available pitches: 3-4/4-6.
SETS
Saw teeth bent out of the plane of the saw body, resulting in a wide cut in the workpiece.
REGULAR OR RAKER SET: Cutting teeth right and left, alternated by a straight tooth.
Of general use for materials with dimensions superior to 5 mm. Used for the cutting of steel,
castings and hard nonferrous materials.
WAVY SET: Set in smooth waves.
This set is associated with very fine teeth and it is mainly used for the cutting of pipes and thin
section bars (from 1 to 3 mm).
ALTERNATE SET (IN GROUPS): Groups of cutting teeth right and left, alternated by a straight
tooth.
This set is associated with very fine teeth and it is used for extremely thin materials (less than
1mm).
ALTERNATE SET (INDIVIDUAL TEETH): Cutting teeth right and left.
This set is used for the cutting of nonferrous soft materials, plastics and wood.