35
ROOF PANELS
Flush
at peak.
Fl
us
h
12"
(30,5 cm)
9/16"
(1,4 cm)
6"
(15,2 cm)
PARTS REQUIRED:
x130
3/4" GAUGE
BLOCK
Maintain spacing between the center
of the rafters
(Fig. E)
.
Secure top of panels with (1) 2" nail
into each rafter.
Move to the bottom and secure panels
with (1) 2" nail into each rafter
(Fig. E)
.
Secure panel with 2" nails spaced 6"
apart on edges and 12" apart
inside panel.
Install the
8-1/2" x 23-7/8"
roof panel
flush to installed panel, flush at peak
and with the 9/16" measurement at
the gable
(Fig. F, Fig. G)
.
Move the gable if necessary.
Install (2) lower roof panels flush
to the upper panels.
Ensure the
23-7/8" x 48"
panel is at
the 9/16" measurement along
the gable trim
(Fig. G)
.
Secure the 2
3-7/8" x 48"
panel with
2" nails spaced 6" apart on edges
and 12" apart inside panel.
Secure the
8-1/2" x 96"
panel to
rafters with 2" nails, as shown.
3
4
5
6
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
2" (5,1 cm) Nails
8-1/2" x 23-7/8"
23-7/8" x 48"
8-1/2" x 96"
Flush
Fig. E
Measurements are from
outside of trim.
Fig. F
Fig. G
2" (5,1 cm)
24-1/2"
(62,2 cm)
24-1/2"
(62,2 cm)
Repeat steps to install roof panels
on the opposite side.
FINISH
Your roof panels are now installed.
