17
Install all panels with the primed side facing up.
Flush
Flush
x45
2" (5,1 cm)
PARTS REQUIRED:
SIDE WALL PANELS
3
4
3/4" (1,9 cm)
1" (2,5 cm)
12"
(30,5 cm)
x1
3/8 x 48 x 72
(1 x 121,9 x 182,9 cm)
2
Ensure your wall frame is square by installing one panel and squaring the frame.
2" (5,1 cm)
Nails
3/4" GAUGE
BLOCK
3/4"
GAUGE
BLOCK
2 Nails
Place (1)
46-1/8" x 72"
panel onto wall frame, as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud.
Secure panel with (2) 2" nails in the corners
(Fig. A)
.
Complete securing the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Move to the opposite end. Using the long edge of the panel as a lever move the
panel side-to-side until you have a 3/4" measurement on the wall stud.
Secure corner with (2) 2" nails
(Fig. B)
.
Fig. A
Fig. B
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
For squareness, maintain flush and
3/4" measurement along panel edge.
BEGIN HERE
6"
(15,2 cm)
3/4" (1,9 cm)
