11
DOOR
First, secure
at ends with
one fastener.
Second, secure
at ends with
one fastener.
151"
(383,5 cm)
151"
(383,5 cm)
Fig. A
FINISH
LEVEL AND SQUARE FLOOR FRAME
Before attaching floor decking, it is important to level and square the floor frame.
A level and square floor frame is required to correctly construct your shed.
BEGIN
¸
1
2
3
4
Use level and check the frame is level before applying floor panels.
Check for frame squareness by measuring diagonally across corners. If the measurements are the same,
the frame is square. The diagonal measurement will be approximately 151" (383,5 cm).
When the frame is level and square secure one side of frame to the 4x4 runners with one fastener at ends
of each runner. Move to the opposite end of the frame. Secure the frame to 4x4 runners with one fastener at
ends of each runner making sure the frame remains square (Fig A).
After leveling and squaring your floor floor, fasten the frame to 4x4s at each connection
where the frame contacts the 4x4 runners .
See page 9 for the preferred floor leveling method.
FLOOR FRAME
FLOOR FRAME
