GETTING READY
23
1
Page 3
1
Turn both the upper and bobbin thread sensors [ON] or
[OFF]. If it is turned [OFF], the machine can be used
without upper thread.
2
The volume of operation sounds and alarm sounds can
be adjusted.
3
Select to save the machine power by setting the [Eco
Mode] or the [Shutoff Support Mode]. (page 24)
4
The machine can be set so that the opening screen is
either displayed ([ON]) or not displayed ([OFF]) when the
machine is turned on.
5
Select the display language. The keys and messages
appear in the selected language.
Page 4
1
The light can be set to be turned either [ON] or [OFF].
2
Change the screen display brightness.
3
Set [Embroidery Crosshair Positioning Laser] to [ON] or
[OFF].
4
Set the brightness of the Embroidery Crosshair
Positioning Laser. (page 62)
Page 5
1
SCS (Embroidery Professional Stitch Count System)
shows the number of stitches that have been
embroidered since the machine’s last maintenance.
*
Use counters
1
as a standard for performing periodic
maintenance and for scheduling professional
maintenance for the machine.
2
Shows the internal machine number for this machine.
3
Shows the version of the software installed on this
machine.
4
Return all data and settings saved in the machine to the
factory defaults. (page 100)
3
5
4
1
2
4
1
2
3
1
4
2
3
