Baby Lock Capella Instruction And Reference Manual Download Page 22 | Manualshive

Page: 22 / 120

Baby Lock Capella Instruction And Reference Manual Download Page 22

20

d

Secure the Embroidery Frame Holder with the two
thumb screws removed in step

b

.

1

Thumb screws

This completes the preparation of the machine.

TURNING ON THE MACHINE

WARNING

• Use only regular household electricity for the

power source. Using other power sources may
result in fire, electric shock, or damage to the
machine.

• Do not plug in or unplug the power supply

cord with wet hands, otherwise an electric
shock may result.

• If any of the following occur, turn off the

machine and unplug the power supply cord,
otherwise a fire, an electric shock or damage
to the machine may result.

• When you are away from the machine.
• After using the machine.
• If a power outage occurs while the machine is

being operated.

• If the machine is not operating properly, for

example, when there is a loose or cut
connection.

• During electrical storms.

CAUTION

• Do not plug this machine in with extension

cords or multi-plug adapters with any other
appliances plugged into them, otherwise a fire
or an electric shock may result.

• When unplugging the power supply cord, be

sure to first turn off the machine, and then
grasp the plug when unplugging the cord.
Pulling on the cord may damage it or result in
a fire or an electric shock.

• Do not allow the power supply cord to be cut,

damaged, modified, forcefully bent, pulled,
twisted, or bundled. In addition, do not place
heavy objects on the cord or expose it to heat,
otherwise damage to the cord, fire or an
electric shock may result. If the power supply
cord or its plug is damaged, stop using the
machine, and then take the machine to your
authorized Baby Lock retailer for repairs
before continuing use.

• For U.S.A. only

This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of
electrical shock, this plug is intended to fit in a
polarized outlet only one way.
If the plug does not fit fully in the electrical
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper electrical outlet. Do not modify the
plug in any way.

«
...
20
21
22
23
24
...
»

Summary of Contents for Capella

























































































































Reviews:

No comments