Assembly
DUO
DMX
GATEWAY
10 BAB TECHNOLOGIE GmbH
DUO
DMX
GATEWAY
3.1.1
CONNECTION DIAGRAM
The following figure is an overview of any available connection variants of the DUO
DMX
GATEWAY.
Figure 3: DUODMX GATEWAY – connection diagram
Connection with the DMX bus
The device has two independently operating DMX interfaces. Depending on the type of device, the
interfaces can be configured as DMX master (sending) or as DMX slave (receiving) on demand. The
device is connected via a 6-pin pluggable screw terminal, polarity is indicated on the housing. It is also
possible to use just one DMX output. The connections are short-circuit-proof (for device type SR) and
can be bypassed.
NOTE:
-
DO NOT CONFUSE the pluggable screw terminals (power supply side and DMX connection
side)!
-
Please take care of the correct polarity when installing the power supply!
At the end of this document you will find a description of the assignment of DMX connectors and
sockets.
