DUO
DMX
GATEWAY
DUO
DMX
GATEWAY
BAB TECHNOLOGIE GmbH 65
6.3.3
PREPARING THE LAMPS AND SCENES
Using the DMX-Configurator, lamps are defined and scenes are created. They are read out by the
DUO
DMX
APP when being connected.
However, what is missing regarding the control of the lamps and scenes via the APP is the information
on which DMX output (DMX world) the individual lamps are to be connected and the scenes are to be
reproduced. This information is not available for the APP; it must be defined by the user once (in the
APP).
If an entry which has not yet been assigned to a DMX output is selected for the first time under the
menu item
Lamps
or
Scene
, the selection menu pops up in which the DMX output can be assigned (left
figure; output not yet selected).
The following figures (one for lamps, one for scenes) show the selection menu.
Output 1
and
Output 2
stand for the DMX outputs (DMX world) at the DUO
DMX
GATEWAY. The selected output is indicated by
the orange marking.
NOTE: If the selection of the DMX output must be changed, the selection can be opened again by a
long click on the lamp or the scene.
Figure 64: Assigning a scene to a DMX output
Figure 63: Assigning a lamp to a DMX output
