DUO
DMX
GATEWAY
DUO
DMX
GATEWAY
BAB TECHNOLOGIE GmbH 51
The DUO
DMX
GATEWAY identifies the dimming as soon as one of the buttons is pressed for more than
500ms, and it stops it, as soon as the button is released. Press the
ON
button of the rocker switch for
brighter dimming and the
OFF
button for darker dimming.
ENOCEAN CONFIGURATION EXAMPLE
Below are the individual steps for controlling (switching and dimming) a DMX channel (e.g. the white
channel of an RGBW lamp) with an EnOcean button (by means of a rocker switch):
1.
Start the
DMX-Configurator
.
2.
Open the
Extension
menu and select the EnOcean variant.
3.
Press and release the EnOcean button at the ON side. This received EnOcean profile is
immediately displayed on the left side of the window. (NOTE: the simple EnOcean button sends a
unique EnOcean profile for both sides of the rocker switch!). See the following figure.
4.
To avoid confusion, rename the profile e.g. to
Switch ON
.
5.
Repeat the steps 3 and 4 for the OFF status of the rocker switch of the EnOcean button. Rename
this profile accordingly e.g. to
Switch OFF
.
6.
Before loading the configuration to the DUO
DMX
GATEWAY, the received EnOcean profiles must
be allocated to the desired DMX channel. Both profiles (ON and OFF) are allocated to the same
DMX channel. Both profiles are necessary for switching on and off, or for dimming.
The figure above shows the complete configuration which is necessary for switching on and off or
for dimming the fourth DMX channel via an EnOcean tactile sensor.
