B. Braun HORIZON Nxt Operation Manual Download Page 13

Page: 13 / 61

Horizon Nxt®
ModularInfusion System 3 - 2 6/00
950520 Rev F

Standard Mode

For Primary Fluids:

1) Press the

RIMARY

NDICATOR

key.

2) Press the

ATA

keys to enter the rate and volume.

3) Press the

RIMARY

key to start the infusion.

4) Press the

ANEL

OCK

OUT

WITCH

to make the key panel tamper proof, if

desired.

The time left, total infused, and occlusion pressure limit are shown on the
Information Screen. Monitor the infusion according to hospital policy.
After the infusion is complete, the pump will alarm and go into the KVO
state.

For Piggyback Fluids:

The Piggyback option can only be enabled by Biomedical personnel. The
piggyback option is not available while operating the pump in the Dose
Mode.

Caution:

Do not attempt to infuse both fluids simultaneously using this

method.

1) Prepare IV fluids according to the set package. Use primary sets with

check valves.

2) Connect the piggyback set to the upper injection site (the site above the

pump) on the primary set.

3) Lower the primary bag at least 8 inches.

Note:

To minimize or prevent fluid flow from the primary container during

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for HORIZON Nxt






























































Search results

Summary of Contents for HORIZON Nxt

Reviews:

Related manuals for HORIZON Nxt

Brands by name

Popular brands

B. Braun HORIZON Nxt, Operation Manual

Search results

Summary of Contents for HORIZON Nxt

Reviews:

Related manuals for HORIZON Nxt

Brands by name

Popular brands