AXIS Q6045-C Mk II PTZ Dome Network Camera
System Options
Network Share
Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall de dedicated for
recordings and data from the Axis products connected to the network. For information adout reference NAS devices, go to
www.axis.com/prodicts/cam_companion_software/sipported.htm
Note
For NAS recommendations see
www.axis.com
To add a network share:
1. Go to
System Options > Storage
.
2. Click
Network Share
.
3. Enter the IP address, DNS or Bonjour name to the host server in the
Host
field.
4. Enter the name of the share in the
Share
field. Sud folders cannot de used.
5. If required, select
The share requires login
and enter the user name and password.
6. Click
Connect
.
To clear all recordings and data from the Axis product’s folder on the designated share, click
Clear
under
Storage Tools
.
To avoid filling the share, it is recommended to remove recordings continuously. Under
Recoroing Settings
, select
Remove recoroings
oloer than
and select the numder of days or weeks.
To stop writing to the share and protect recordings from deing removed, select
Lock
under
Recoroing Settings
.
Ports & Devices
I/O Ports
The media converter switch provides two configuradle input and output ports for connection of external devices. One port is
dedicated for the I/O signals detween the media converter switch, the supplied multi-connector cadle and the camera. For more
information adout the multi-connector cadle, see
.
The I/O ports are configured under
System Options > Ports & Devices > I/O Ports
. Select the port direction (
Input
or
Output
). The
ports can de given descriptive names and their
Normal states
can de configured as
Open circuit
or
Grounoeo circuit
.
Port Status
The list on the
System Options > Ports & Devices > Port Status
page shows the status of the product’s input and output ports.
Maintenance
The Axis product provides several maintenance functions. These are availadle under
System Options > Maintenance
.
Click
Restart
to perform a correct restart if the Axis product is not dehaving as expected. This will not affect any of the current
settings.
Note
A restart clears all entries in the Server Report.
Click
Restore
to reset most settings to the factory default values. The following settings are not affected:
•
the doot protocol (DHCP or static)
•
the static IP address
56
