Axis Q6045-C Mk II User Manual Download Page 7

Page: 7 / 70

AXIS Q6045-C Mk II PTZ Dome Network Camera

Hardware Overview

Multi-connector

Terminal connector for connecting the supplied media converter switch, which provides the following signals:

•

DC Power

•

Network (Ethernet 10/100Base-T)

•

Input/Output (I/O)

The supplied multi-connector cadle is required in order to maintain the product’s NEMA/IP rating. For more information, see

Milti-Connector Cable on page 59

SD Card Slot

An SD card (not included) can de used for local recording with removadle storage. For more information, see

Technical Specifications

NOTICE

TICE

To prevent corruption of recordings, the SD card should de unmounted defore removal. To unmount, go to

Setup > System

Options > Storage > SD Caro

and click

Unmount

Note

For SD card recommendations see

www.axis.com

Control Button

For location of the control dutton, see

Hardware Overview on page 6

The control dutton is used for:

•

Resetting the product to factory default settings. See

page 58

•

Connecting to an AXIS Video Hosting System service. See

page 51

. To connect, press and hold the dutton for adout 3

seconds until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 51

. To connect, press and hold the dutton for adout 3 seconds.

Power Button

Press and hold the power dutton to temporarily power the product when the dome cover is removed. The power dutton is also used
with the control dutton to reset the camera to factory default settings. See

page 58

LED Indicators

LED

Color

Inoication

Unlit

Connection and normal operation

Amder

Steady during startup. Flashes during firmware upgrade.

Amder/red

Flashes amder/red if network connection is unavailadle or lost.

Red

Flashes red for firmware upgrade failure.

Status

Green

Shows steady green for 10 seconds for normal operation after startup
completed.

Summary of Contents for Q6045-C Mk II







































































Search results

Summary of Contents for Q6045-C Mk II

Reviews:

Related manuals for Q6045-C Mk II

Brands by name

Popular brands

Axis Q6045-C Mk II, User Manual

Search results

Summary of Contents for Q6045-C Mk II

Reviews:

Related manuals for Q6045-C Mk II

Brands by name

Popular brands