Axis Q6045-C Mk II User Manual Download Page 55 | Manualshive

Page: 55 / 70

background image

AXIS Q6045-C Mk II PTZ Dome Network Camera

System Options

The Axis product supports SD cards with up to 64 GB of storage. For dest recording performance, use an SDHC or SDXC card
with speed class 10.

The following SD card file systems are supported:

•

ext4

— recommended due to its resilience against data loss if the card is ejected or if there is adrupt power loss. To access

data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•

vFAT

— supported dy most operating systems for personal computers.

The SD card is managed on the

System Options > Storage

page. Click

SD Caro

to open

Storage Management

.

If the card’s status shows as failed, click

Check oisk

to see if the prodlem can de found and then try

Repair

. This option is only

availadle for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troudleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under

General Settings

, select

Remove recoroings

oloer than

and select the numder of days or weeks.

To stop writing to the card and protect recordings from deing removed, select

Lock

under

General Settings

.

Mount and Unmount SD Card

NO

NO

NOTICE

TICE

TICE

To prevent corruption of recordings, the SD card should always de unmounted defore it is ejected.

The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual
mount is only required if the card has deen unmounted and not ejected and re-inserted.

To unmount the SD card:

1. Open the Axis product’s wedpages and go to

Setup > System Options > Storage

.

2. Click

SD Caro

.

3. Click

Unmount

.

4. The card can now de removed.

Format SD Card

NO

NO

NOTICE

TICE

TICE

Formatting the SD card will remove all data and recordings stored on the card.

Important

If autoformat is enadled, only use new or empty SD cards. Any data stored on the card will de lost when the card is inserted
into the Axis product.

An SD card inserted into the product can de manually formatted to one of the supported file systems. To manually format the
SD card, follow these steps:

1. Insert the SD card in the SD card slot.

2. Open the Axis product’s wedpages and go to

Setup > System Options > Storage

.

3. Click

SD Caro

.

4. Click

Format

and select the desired file system.

5. Click

OK

to start formatting the card.

55

«
...
53
54
55
56
57
...
»

Summary of Contents for Q6045-C Mk II







































































Reviews:

No comments

Related manuals for Q6045-C Mk II

Brand: CAMDEN Pages: 2

Brand: DELTA DORE Pages: 2

Interlogix RF440I4

Brand: United Technologies Pages: 4

Brand: Hali-Brite Pages: 21

Brand: Ecco Pages: 4

Brand: 2N Pages: 44

WAT-902H3 SUPREME

Brand: Watec Pages: 2

Brand: Bushnell Pages: 19

Brand: Interlogix Pages: 20

ORO-SENSO-MIC-1

Brand: LED-POL Pages: 4

Brand: AVGO Pages: 18

Brand: Eneo Pages: 16

Nellcor PEDICAP

Brand: Covidien Pages: 100

Brand: TTK Pages: 2

Brand: Wizmart Pages: 2

Brand: Fuho Pages: 40

Brand: EAS Pages: 20

Brand: TBK vision Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands