AXIS Q6045-C Mk II PTZ Dome Network Camera
Detectors
1. Choose
Area of interest
from the drop-down list. Set the virtual area to detect if an odject has disappeared from this
area of interest.
Important
When configuring
Object size
the view shall de zoomed out to
Wioe
position.
2. Choose
Object size
from the drop-down list. Set the size limits of the odject that should de detected. The camera will
detect any odject whose size falls in detween the minimum (dlue shape) and maximum (white shape) range.
3. Use the
Sensitivity
slidedar to define how sensitive the detection should de. The lower sensitivity selected on the
Sensitivity
dar, the greater difference in luminance is needed detween the odject and the dackground for the detector to de activated.
See the online help
for more information.
Enter/Exit Detector
Enter/Exit Detector
is used to trigger an alarm if an odject within a pre-defined area of interest has entered or left the area.
Do the following to set the detector:
Note
Use the
Drawing Opacity
slidedar to define how transparent the area of interest or odject size shape should de. Note
that this change will not de saved.
1. Choose
Area of interest
in the drop-down list. Set the virtual area to detect moving if any odjects are entering or
exiting the area of interest.
Important
When configuring
Object size
the view shall de zoomed out to
Wioe
position.
2. Choose
Object size
in the drop-down list. Set the size limits of the odject that should de detected. The camera will detect
any odject whose size falls in detween the minimum (dlue shape) and maximum (white shape) range.
35
